Custom Building Products TLMTCAHG Installationsanleitung PDF herunterladen

Care & Maintenance / TDS-151

1 Product Name

TileLab®GlossSealer&Finish

2 Manufacturer

Custom Building Products

Technical Services

10400 Pioneer Boulevard, Unit 3

Santa Fe Springs, CA 90670

Customer Support: 800-272-8786

Technical Services: 800-282-8786

Fax: 800- 200-7765

Email: [email protected]

custombuildingproducts.com

3 Product Description

High-gloss, protective finish and surface sealer for Saltillo, terra-cotta,

quarry tile, slate and flagstone. Seals the surface to resist stains, dirt

and grease. Beautifies and enhances color while providing scuff, mar

and scratch resistance. This acrylic, water-based finish has low odor

and will not yellow with age. For interior dry areas only.

Key Features

Seals for stain protection with a gloss finish

Uses

For clay pavers including Saltillo, terra-cotta and adobe, cement tile,

quarry, slate and sandstone.

For interior dry applications only.

Packaging

1/2 gallon (1.89 L) bottle

4 Technical Data

Technical Properties Chart

Stain resistant to most household contaminants (CTI-072)

Does not blush from puddled water

Alkali strippable

Complies with all Federal and SCAQMD Standards for VOCs

Technical Chart

Property Test Method Requirement Typical Results

Stain Resistance CTI-072 n/a Good

pH n/a

Darken Stone No

Cure Time 24 Hours

Expected Wear Up to 3 Years

5 Instructions

General Surface Prep

Surface should be dry, clean and free of waxes, sealers, or finishes.

Do not apply directly over silicone sealers, oil or wax based finishes.

TileLab®HeavyDutyStripper&Cleanerwillcleanthesurfaceand

remove wax or old acrylic finishes. Place a few drops of water on

various tiles. If water doesn't penetrate, additional removal is

necessary.GlossSealer&FinishcanbeappliedoveranyTileLab®

sealer except Stone Sealer & Enhancer. New installations need to be

cured at least 48 hours before application. Clay and Saltillo tile may

require extended drying time depending on temperature and humidity.

Make sure the tiles are completely dry before application. Test product

in obscure area to ensure desirable results.

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when

handling product.

Read entire label before using. For new installations, sealer can be

applied to a dry surface as soon as 48 hours after grouting. Surface

must be clean, dry, and free of existing sealers or coatings.

Apply 2-3 coats of finish with a clean dense sponge, brush or paint pad

applicator in thin, even coats. Allow 1-2 hours drying time between

coats.

Pre-Grouting Application

Apply over clean stone or tile a minimum of 2 hours prior to grouting -

follow application procedures above.

Drying Time

4–6hours.

Cleaning of equipment

Clean tools and hands with soap and water immediately after use.

Storage

Close container tightly after each use

Store in original container only

Storeandusebetweentemperaturesof40°F90°F(4°C32°C)

Dispose of residue or any unused leftover product in accordance with

applicable federal, state, and local requirements

TileLab®GlossSealer&Finish

Published Date: 2/4/2015

1 2 3

Coverage 3
Published Date: 2/4/2015 3

Inhaltsverzeichnis

Seite 1

Care & Maintenance / TDS-1511 Product NameTileLab®GlossSealer&Finish2 ManufacturerCustom Building ProductsTechnical Services10400 Pioneer

Seite 2

Care & Maintenance / TDS-151Health PrecautionsMAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN.Wear skin and eye protection. Contains 2-but

Seite 3 - Published Date: 2/4/2015

Care & Maintenance / TDS-151 CoverageSize Min Coverage Max Coverage1/2 Gallon (1.89 L) 150sq.ft.(14M²) 250sq.ft.(23.5M²)TileLab®GlossSe

Kommentare zu diesen Handbüchern

Keine Kommentare

Custom Building Products TLMTCAHG Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Custom Building Products TLMTCAHG herunter. Custom Building Products TLMTCAHG Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Custom Building Products TLMTCAHG